How to cut Nissan NSN14 key with iKeycutter CONDOR XC-MINI Master?

How to cut Nissan NSN14 key with iKeycutter CONDOR XC-MINI Master?

Here is the instruction on cutting Nissan NSN14 key with original iKeycutter CONDOR XC-MINI Master key cutting machine.

There are 3 ways to make keys with iKeycutter CONDOR XC-MINI Master key cutting machine. Here adapts the third way: "Cut by Bitting" with an existing the original key.

1. Power on the key cutting machine.
2. Select "Cut by Bitting".

3. Select the Blank key "NSN14", Press "Confirm".

4. Select key type and confirm.

5. Click on "Key Decode" button. The found bitting and Clamp M1 to be used will display on the screen, Click on "Confirm".

6. Verify bitting and modify bitting, click "Cut".

7. Start key cutting

8. Change the key
9. Put a new Blank Key in the proper position of the clamp.

10. Press "Direct processing".

11. Cut key in progress

12. Take out the new key
13. Compare original key and new key. The left one is the new key, it is a little different in size, it works.

14. Test the new key.