Autel MOT Pro EU908 Multi Function Scanner Diagnostic Operation: Read and Erase Codes
Autel MOT Pro EU908 Multi Function Scanner Diagnostic Operation: Read and Erase Codes
Autel MOT Pro EU908 diagnostic operation function allows you to read and clear diagnostic trouble codes (DTCs) from a vehicle.
A. Read Codes
The Read Codes procedure varies for each vehicle being tested. This section includes the following Read Codes procedures.
In the Function Menu screen, select Read Codes. This will display the Read Codes menu screen.
In the Read Codes menu, select one of the options to proceed. The screen will show as below.
Select one of the DTC options to view detailed diagnostic trouble code information.
You can save the code results for later review by selecting Save option on the bottom. When you finished viewing the DTCs, press the ESC button to return to previous screen.
B. Erase Codes
After reading and/or reviewing the diagnostic trouble codes, use the following steps to erase the codes from the vehicle. If Erase Codes is not an available menu option, consult the manufacturer's service manual for the correct "clear code" method.
NOTE: This Erase Codes function clears the DTCs from the selected ECU or provides instructions for how to manually clear the codes from the ECU.
NOTE: Before performing this procedure, make sure the vehicle's ignition key is in the On (Run) position with the engine off.
To Erase DTCs, please follow these steps:
1. With the Function Menu screen displayed (Figure 5.23), click on Erase Codes. The scan tool displays an instruction message.
2. Follow the instructions on each screen that appears until the procedure is complete.
3. When finished, press any key to exit.
4. Use Read Codes function to check the codes again to see if DTCs have been erased successfully. If any codes remain, repeat the Erase Codes steps.
More check the new Autel MOT Pro EU908:
http://www.eobdtool.fr/wholesale/autel-mot-pro-eu908-scanner.html.
Autel MOT Pro EU908 diagnostic operation function allows you to read and clear diagnostic trouble codes (DTCs) from a vehicle.
A. Read Codes
The Read Codes procedure varies for each vehicle being tested. This section includes the following Read Codes procedures.
In the Function Menu screen, select Read Codes. This will display the Read Codes menu screen.
In the Read Codes menu, select one of the options to proceed. The screen will show as below.
Select one of the DTC options to view detailed diagnostic trouble code information.
You can save the code results for later review by selecting Save option on the bottom. When you finished viewing the DTCs, press the ESC button to return to previous screen.
B. Erase Codes
After reading and/or reviewing the diagnostic trouble codes, use the following steps to erase the codes from the vehicle. If Erase Codes is not an available menu option, consult the manufacturer's service manual for the correct "clear code" method.
NOTE: This Erase Codes function clears the DTCs from the selected ECU or provides instructions for how to manually clear the codes from the ECU.
NOTE: Before performing this procedure, make sure the vehicle's ignition key is in the On (Run) position with the engine off.
To Erase DTCs, please follow these steps:
1. With the Function Menu screen displayed (Figure 5.23), click on Erase Codes. The scan tool displays an instruction message.
2. Follow the instructions on each screen that appears until the procedure is complete.
3. When finished, press any key to exit.
4. Use Read Codes function to check the codes again to see if DTCs have been erased successfully. If any codes remain, repeat the Erase Codes steps.
More check the new Autel MOT Pro EU908:
http://www.eobdtool.fr/wholesale/autel-mot-pro-eu908-scanner.html.
Autel MOT Pro EU908 Multi Function Scanner Diagnostic Operation: Read and Erase Codes
Reviewed by Unknown
on
19:22:00
Rating:
Reviewed by Unknown
on
19:22:00
Rating:
Aucun commentaire: