How to use the 2015 VVDI2 Commander Key Programmer to make BMW CAS1/CAS2/CAS3 dealer key by OBDII?

How to use the 2015 VVDI2 Commander Key Programmer to make BMW CAS1/CAS2/CAS3 dealer key by OBDII?

2015 VVDI2 Commander Key Programmer

Attention: Under these steps, there will come some ASK or NOTE message, they all can be found in chapter 5.2 of the manual: http://www.eobdtool.fr/upload/pro/201512/vvdi2-vvdi-pro-commander-key-programmer-bmw-user-manual.pdf.

Prepare new key steps: Lost all key is same with add key

1) In (PICTURE 4.1), use Connect to detect CAS type and read CAS identification information
2) In (PICTURE 4.1) , use Key Learn enter key learn window (PICTURE 5.1)
3) In (PICTURE 5.1), use Get Key Info read CAS immo data, cutting code, remote frequency and etc
4) In (PICTURE 5.1), use Save Key Info save the read key info
5) There's 2 methods for make key:

Method 1: In (PICTURE 5.1), select Prepare dealer key with programmer
a) Input a new blank key to VVDI2 programmer
b) Select a key position for new key (If the selected position have key already, must use Add Key to add new key to CAS system)
c) In (PICTURE 5.1), press button Prepare dealer key with programmer wait procedure complete
d) After make dealer key successful, try start directly. If can start engine, turn to step
   6). If not work, add the made key to CAS system with Add Key in (PICTURE 5.1)
e) After new key can start engine turn to step 6). Attention: Sometimes add new key for CAS1/CAS2/CAS3 will cause car not start, you can follow chapter 4

Special Note 2

Method 2: In (PICTURE 5.1), select Prepare dealer key with ignition switch, select key type and pre-process the blank key, insert to ignition switch and wait complete. After finish, turn to step 6). If you get failure here, you need unlock the key with key info before next make dealer key.
6) In (PICTURE 5.1), clear trouble codes with Clear DTC and Clear Shadow.
7) Complete

PICTURE 4.1

PICTURE 5.1