Tacho Pro 2008 July PLUS Universal Odometer Correction on Audi Model A3/S3 Magneti Marelli model 2000

Tacho Pro 2008 July PLUS Universal Odometer Correction on Audi Model A3/S3 Magneti Marelli model 2000

How to recognize model 2000?
To recognize model 2000, take a look at the clock. If it is electronic, it is model 2000, if it is mechanic it is an older model.

Prepare:
Plug needed

Tacho Pro 2008 July PLUS Universal

• Remove the cluster and open it.
• Connect the blue and the green plug to the instrument.
• Also connect the black and the red cables like shown in the picture.
• IMPORTANT: You must not move the black and the red contact when beginning to read until you are ready with programming. A good contact is absolutely necessary.
• Select the menu Audi-A3-A3 2000-Magneti Marelli.
• The Tacho Universal shows you the old value.
• Enter the new value.
• Verify the new value with OK.

Note:

If the handhels shows you "out of range" the contact was bad or the database may be corrupted. For security reasons you cannot program the instrument at this moment. Normally it will be possible to program again after driving about 100 km.