Tacho Pro 2008 July Worked on BMW Model 7 series E38 high - IKE

Tacho Pro 2008 July Worked on BMW Model 7 series E38 high - IKE  

Device Needed: 
Tacho Pro 2008 July PLUS Universal
Model 7 series E38 high - IKE (instrument with 2 buttons), after 11/1997, hardware 4,5,6, up to software 12

Adapter Needed from Tacho Pro:

• Remove the cluster.
• Connect the cluster plug with the white and blue port and the Tacho Universal.
Ensure that the red point on each plug faces pin 1 on the instrument´s port.
• Select the menu BMW-5er/7er-E38/E39 high –IKE
• The Tacho Universal shows you the hard- and softwareversion of the instrument.
• Enter the new value.
• Verify the new value with OK.
• The Tacho Universal asks now OK or UNDO.
• If you take a look at the display now, you can see the new value. If it is good, press OK, if not, you can undo everything with STOP.